Help

Minecraft Circle Generator: Hollow or Filled, Any Radius up to 256

Pick a radius or diameter and the grid shows every block to place for a circle, seen from above. The tool counts the blocks, gives each row's X range, and marks the centre block so you always know where you are. It also saves the whole grid as a PNG you can keep beside your build. It is an independent tool, not made by or affiliated with Mojang.

How to make a circle, block by block

  1. Next to Size by, choose Radius or Diameter, then type a number in that field. Radius runs from 1 to 256 and Diameter from 3 to 513.
  2. Choose a Shape: Hollow ring for a wall, or Filled circle for a solid floor.
  3. For a ring, set Wall thickness. It only appears for Hollow ring.
  4. Read the grid. Coloured squares are blocks to place, and the marked square in the middle is the centre block, with a dot when it is left empty. The count above the grid says how many blocks you need, for example 56 blocks, and how wide the circle is, for example 21 blocks across.
  5. Point at or select any block. The panel shows its coordinates (X 3 · Z -4), whether to Place a block or Leave empty there, and the row total with its X ranges, like Row Z -4: 5 blocks.
  6. Build from the centre block outward, one row at a time, using the X ranges. Press Download PNG to keep the plan.

Radius, diameter and how many blocks you need

The circle is always built around one centre block, so a radius of r is 2r + 1 blocks across. Radius 10 is 21 blocks wide, with 10 blocks on each side of the middle one. Here are the block counts for common sizes, with the default wall thickness of 1.

RadiusDiameter (blocks across)Hollow ringFilled circle
371637
5112897
81748225
102156349
1633112861
25511682,053
501013168,021

If you already know the width you want, switch Size by to Diameter. The field accepts odd numbers from 3 to 513 and shows the hint always odd so one block sits at the center. For the area of the circle itself rather than a block count, Circle Area Calculator is the quicker tool.

Why the diameter is always odd

Every circle here has a single centre block at X 0, Z 0. That makes the diameter odd: 11, 21, 51 and so on. A circle with an even width, centred where four blocks meet, would need a different layout, and this tool does not make one. If you type an even diameter, it is rounded up to the next odd number, so 100 becomes 101. For a width of exactly 100 you would need to adjust the plan by hand.

Hollow ring or filled circle, and wall thickness

A radius-10 ring needs 56 blocks at thickness 1, 124 at thickness 2 and 172 at thickness 3. Thick walls grow the count quickly, so check the number before you gather materials.

How the circle is worked out

A block is placed when its centre is within radius + 0.5 of the centre block. A hollow ring also leaves out any block whose centre is within radius - thickness + 0.5 of the middle. This gives the usual blocky circle, and the same rule is used for every size.

Reading the rows and coordinates

The numbers are offsets from the centre block, not world coordinates. X grows to the right and Z grows downward on the screen, like a top-down map. The centre block, X 0 and Z 0, is drawn in a contrasting colour, with a dot when it is left empty, and the axes through it are drawn heavier so you can find the middle even when zoomed out.

Example

Radius 10, Hollow ring, thickness 1. Point at the top row and the panel reads Row Z -10: 7 blocks, with X from -3 to 3. One row lower, the wall splits into two short pieces, one on each side, so that row totals 4 blocks.

Zoom, pan and download

Drag the grid to pan, and use the mouse wheel or a pinch to zoom. The Zoom in, Zoom out and Fit the whole circle buttons do the same. Large circles are easier to follow zoomed in, where the grid shows coordinate numbers; use Fit the whole circle to get back to the overview. Download PNG saves the whole grid with its coordinate numbers in light colours, with each block 7 to 32 pixels wide depending on the circle's size. If a very large circle cannot be turned into an image, the tool says Couldn't make the image. Try a smaller circle.

Other tools for round shapes

Starting from a picture rather than a radius? Image to Pixel Art turns a picture into a block grid. If you only have three points on a curve, Circle from 3 Points finds the radius and centre.

What this tool does not do

Frequently asked questions

How do I use a Minecraft circle generator?

Enter a Radius, pick Hollow ring or Filled circle, and read the grid. Every highlighted square is a block to place, and the marked square in the middle is the centre block you build outward from. Point at any block to see its X and Z offset and the whole row's X ranges, so you can lay the circle down row by row.

How many blocks does a Minecraft circle need?

The total is shown above the grid as, for example, 56 blocks. A hollow ring of radius 10 is 56 blocks, and a filled circle of radius 10 is 349. Change Radius, Shape or Wall thickness and the count updates at once.

Can I get a Minecraft circle chart for a size like 51 or 100?

Yes for 51: set Size by to Diameter and enter 51, which is a radius of 25, a hollow ring of 168 blocks or a filled circle of 2,053. A diameter of 100 is even, so the tool rounds it up to 101 (radius 50), which is 316 blocks as a hollow ring.

Can I make a Minecraft circle with an even diameter?

No. This generator always builds around one centre block, so the diameter is always odd (a radius of r is 2r + 1 blocks across). If you type an even diameter, it is rounded up to the next odd one. Circles centred between four blocks, which have an even width, are not supported.

How do I make a Minecraft circle with a thicker wall?

Keep Shape on Hollow ring and raise Wall thickness. It runs from 1 up to the radius, and at the radius only the centre block is left empty. A radius-10 ring is 56 blocks at thickness 1, 124 at thickness 2 and 172 at thickness 3.

Does the circle generator show block numbers and coordinates?

Yes. Zoom in and the grid labels its rows and columns, and pointing at or selecting a block shows its coordinates, such as X 3 · Z -4, plus the row total. The PNG you download has the coordinate numbers drawn on it too.

How do I save the circle as a Minecraft circle template?

Press Download PNG. You get an image of the whole circle with its coordinate numbers, drawn in light colours so it prints and reads clearly. Each block is 7 to 32 pixels wide, depending on how big the circle is.

Does it plan stairs and slabs, or make a sphere?

No. It plans one flat layer of full blocks, seen from above. For a taller wall, repeat the same layer upward. For a sphere or dome, change Radius for each layer and build the layers one at a time.

Can I use it for Terraria or other block-building games?

Yes. The grid is just a circle drawn in square blocks, so it works in any game where you place square blocks on a grid. Capsule Tools is not affiliated with Mojang, Microsoft or Minecraft.

Does it work with my world's coordinates?

The X and Z numbers are offsets from the centre block, which is X 0, Z 0. X grows to the right and Z grows downward on the screen. To get world positions, add the offsets to the position of the block you chose as the centre.

Is anything uploaded?

No. The circle is calculated and drawn in your browser, and the PNG is made on your device.

Recommended

Helps keep the tools free. ✨

Images are for illustration only. As an Amazon Associate I earn from qualifying purchases.